5 Ways to Identify Top Plumbing Issues and Solve Them

5 Ways to Identify Top Plumbing Issues and Solve Them

Plumbing problems can be irritating, and solving them can be very expensive. We do not understand the importance of plumbing until an issue arises. Issues like clogged drain or leaky faucets can be a real pain in your life. We are going to discuss some common plumbing problems and how you can get rid of them.

Most of these problems occurred as the house ages, it natural to have some plumbing problems as the plumbing material rusts and corrodes. Let’s discuss the common issues related to plumbing and how you can solve it all by yourself.

1. Clogged Drains and Toilets

A clogged drain can be spotted easily when you see water backing up as you empty the sink or take a shower. For a toilet, we can see immediately as we flush, the water would be backing up. This is due to a blockage in the drain.

How to fix these drains

Start with a plunger to remove the blockage in the pipes. This simple plumbing tool uses air pressure to remove the item in a tube, place the open end of the plunger over the drain and move up and down to create suction. Due to the suction of air, you will get the item.

2. Leaky Faucets and Pipes

Leaking faucets and pipes is a pretty common plumbing problem. Dripping pipe and faucets can be a nuisance and waste of money as well. If you fix the leaks in faucets and pipes in your home, you can save up to 10 per cent of the water bill.

A leaking pipe in the wall could spell disaster for your home. You have all sorts of lines running through walls, ranging from water pipes, sewer pipes, and even gas connections. If you notice a strange spike in your water bill but can‘t seem to find any of the signs above, it may be a little more challenging to find the leak.

How to fix the leaky faucets and pipes

Leaky faucets can be cured by replacing the washer responsible for the leak. You have to buy a new joint and replace it with the old one. But if you do not know how to do that, you should call the professional before creating any mess.

3. Running toilet

Running toilet is undoubtedly the most annoying plumbing problem in this toilet work, but the water in it continually runs.

Fixation of the running toilets

Check each component of the toilet to find the faulty part. Ensure that a thin tube is still attached and directed toward the overflow tube if it is not, fix it. The chain should be attached to the flapper for proper length and ensure that it is not tangled. Check that if any part is broken, if any part is, you have to replace it.

4. Low water issues

Another common plumbing problem is low pressure; this is usually due to the age of the houses.

Fixation of low pressure

If you think the build-up is the problem, start with aerators of showerheads where you are having the water-issue. Just soak the aerator in vinegar overnight to  Aus Star Plumbing & Gas loosen up and to improve the water pressure.

5. Water-Heater Issues

It is a common plumbing problem; it includes cold water, dripping water, discoloured water, noises, and many more.

Fixation of problems

If you think the mineral deposit is the problem, drain the tank to flush out the sediment. But if you think it is something else, call a trusted local plumber.

Plumbing can be an ambiguous task to handle, and many common problems can arise. By following these do-it-yourself tips, you can save yourself time and money.